The HT-REVERB can take you from your room to an arena via hall, plate, spring, gate and reverse reverb effects. Valve compression and harmonics are added using the Dwell control, and you can switch the reverb time from short to long while you are playing.
EIGHT REVERB EFFECTS
The HT-REVERB can take you from your room to an arena via hall, plate, spring, gate and reverse reverb effects. Each effect can be altered using the Time, Tone and Dwell controls.
OPERATES AT 300V HT
The HT pedal operates on a 300V DC anode supply voltage (High Tension voltage). This is the same used in traditional valve amplifier design and means the circuit has the headroom associated with a true valve design and will 'clean up' accordingly. The pedal will exhibit the compression and distortion characteristics associated with a true valve design.
Many hours of research showed us that only soft switching and a buffered bypass signal will give absolutely silent switching in high gain applications.
By adjusting the drive to the high voltage valve circuit in the effect side chain, the Dwell control affects the amount of valve compression and harmonics in the effect.
MANUAL AND SHORT/LONG MODES
The HT-REVERB features manual and short/long modes for maximum playing flexibility. The manual mode is a time control that sets the reverb decay length. The short/long mode toggles between preset short and long times for live flexibility.
8 reverb effects
Genuine valve design
Operates at 300V HT
Unique dwell control
Manual and Short/Long modes
Unique switching operation
Power supply included
High integrity buffered bypass
Made in KOREA.
HT Effects Pedals
ECC83 / 12AX7
Effect, Time, Tone, Dwell, Level, Input, Left (Mono) Output, Right Output